123.hp.com/envy127 – HP Envy 127 Setup

For setting up the HP Envy printer setup (123.hp.com/setup):

1. Unpack the printer from its box
2. Check if all the list of items are available
3. Remove the tape around the lid of the scanner by raising it
4. Unpack the cleanout area and ink cartridge access area by removing the tape around it
5. Extend the paper tray door to remove the tape around it
6. Push the paper tray forward till you hear a click
7. Plug the printer into its power source and set the Preferences
8. Press the down arrow on the control panel and select the language and Set Country/Region
9. Press Ok to confirm actions
10. Load the paper into the paper tray and adjust slider widths
11. Align papers and push the paper tray forward till it clicks into place
12. Raise the access door to the ink cartridges to load and lock them into place
13. The carriage moves automatically to an accessible position for mounting the cartridges
14. Once the carriage is idle continue with the HP Envy printer setup
15. Without touching the ink nozzles remove the plastic tape from top of the cartridges
16. Lift the lid of the ink cartridge slot and snap the cartridge into place
17. Repeat the action for other ink cartridges and close the lid to secure the cartridges in their places
18. Align the cartridge by closing the access door of the print cartridge
19. Follow the instructions shown on the control panel
20. Once the cartridges are aligned, the printer prints an alignment page